The higher the number on the temperature dial of a Galanz mini fridge, the colder the fridge will be. Therefore, 7 is colder than 1 on a Galanz mini fridge.
A dial that numbers 0-7 controls the temperature. 7 is the coldest. To start, the manual suggests setting the temperature at 4
Galanz Black’s mini fridge has a freezer compartment of half width that can be used to store ice and frozen foods.
The shelf is also coated with wire and slides out to make it easy to access items stored at the back. The interior door provides space for condiments or a 2-liter bottle.
Galanz 1.7 Cu Ft One Door Mini Fridge also includes two front legs that are level for increased stability. It also has a reversible door that allows you to hang it from either the right or left side.
What setting should the Galanz Mini Fridge be on?
The temperature of both compartments in the Galanz Retro 4.0 Cu Ft. mini refrigerator can be controlled by a single dial.
At its lowest setting, the freezer should be set at 32 degrees (1). The freezer should be set at 20 degrees, while the refrigerator should reach 40 degrees.
How cold should a freezer be?
To preserve the quality of frozen foods, freezer temperatures should be kept at 0oF (-18oC). While a temperature range of -1oF to 1oF is acceptable, it’s best to keep your freezer at the lower end of the spectrum to prevent freezer burn.
How long does a Galanz mini-fridge last?
Mini fridges can last from 6-14 years but should be replaced every 10 years. To get the most out of your investment, make sure you clean and maintain your fridge.
Which Mini Fridge Is Colder: 1 or 7?
It can be described as cooling power almost always. It can be set to 7, which is the coldest, and 1, which is the warmest. 0 is off.
How to Reset a Galanz Fridge
Unplug a Galanz fridge for 5-10 minutes to reset it. To reset the cooling system, change the temperature dial to “OFF” and then “0”.
Then, plug it in again and turn the fridge ON. Finally, set the temperature to your preference.
If your Galanz fridge suddenly stops working after a power cut, you should reset it. It may also stop cooling after months of inactivity.
If you are moving or cleaning out your fridge, a reset is also helpful.
8 Steps To Reset A Galanz Fridge
1. Remove the Refrigerator from The Facade
Access to the distributor that wires your refrigerator in is necessary. If your refrigerator or freezer is blocking, you will need to move it.
2. Unplug the Refrigerator
You can reset a Galanz refrigerator by cutting off its power supply. You can do this by unplugging the power cord from its wall socket. You can also turn off its circuit breaker.
3. Leave the Settings Menu
Switching off the settings tab of your refrigerator is the best way to get out. It will show “0” or “off”. If you have a combination refrigerator/freezer, make sure to turn both off.
4. Allow to rest for approximately 5-10 minutes
Next, unplug your appliance for approximately 5-10 minutes.
Unplugging your fridge will allow you to keep a certain amount power supply on the system.
Your appliance won’t be able to reset unless the power supply is completely cut off.
5. Reconnect the Refrigerator
Once your refrigerator is turned off, it can be rebooted. Connect the refrigerator to the wall outlet first.
6. You can adjust the temperature to suit your needs
After you have turned on your Galanz fridge turn it off and set the temperature.
To do this:
- Close the refrigerator door.
- Find the temperature dial.
- You can turn the dial clockwise to reach your desired setting.
You can adjust the temperature of fridge models that have display panels by pressing the UP button.
Related:Freezer Drawer Stuck
7. Wait And Observe
Your refrigerator will need to maintain its temperature for 24 hours. It’s normal for fridges to take time to settle.
While you wait for the Galanz refrigerator to be fixed, be attentive. To allow it to cool down as quickly as possible, keep the refrigerator doors closed as long as you can.
8. Galanz Support for Service
Galanz support can help if the above troubleshooting methods fail. Make sure you have the following items ready before you call Galanz support.
- Information about the warranty
- Galanz refrigerator model.
- Galanz refrigerator serial number.
- After you submit it, they will either provide additional solutions or send a technician directly to your home. Whichever option is best for you.
You can take your mini-fridge to any of their service centres for repairs. You will need to make an appointment, as they only offer limited carry-in services.
Galanz Fridge Reset Buttons
Galanz refrigerators do not have a reset button. To reset the fridge, unplug it or turn off its circuit breaker for 5-10 minutes. Next, turn the temperature dial to “OFF” then plug it back in. After that, you can adjust the temperature to your liking.
Resetting your fridge takes only a few minutes. However, your fridge may take up to 24 hours for it to cool down.
Galanz Fridge: The Ideal Setting
The temperature of the Galanz 4.0 Cu. Ft. partitions is 0°C. A single potentiometer controls the retro mini fridge.
On the lowest setting, the freezer should operate at 32deg C. The freezer should be set at 20°C and the refrigerator 40°C.
This concludes the list with all of the necessary information.
This fridge is highly recommended. It’s stylish, keeps things cool and offers plenty of storage space. It can be used in a dorm, workshop, or as an additional space in the downstairs. This review was the easiest for the Galanz Mini Fridge. It proved to be a great product.